Features
● eparate amplifier into one chassis
● Rack mount amplifier in 2U height
● Rated power from 120W per channel
● Individual volume and tone control for each channel
● 70V, 100V, 200V outputs for each channel switchable
● Reliable protection from overheat, overload, clip & short circuit
● Exchange control signal and status information with MAG host
● Built-in voice message or siren modules for priority
The dual channel amplifier are designed for commercial and industrial public address applications. With two separate amplifiers in a single chassis and rated power is 120W. The amplifier is design of rack mount type and its 2U height. These high-powered amps can be supported lots of function.
The Amplifier can be exchanged control signal and status information with MAG host. This product can be called dual 2 channel amps.
Both balanced and unbalanced line inputs are available for each channel. 70V, 100V and 200V outputs for each channel are convenient when installation and can be matched with different speakers. Individual volume and tone control function for each channel are ensured. Complete protection from over heat, over load, clip & short circuit. With indications for power, signal, clip, protection and Temp.
Specification
Connection
Model | MAG1312II |
Rated power | 120 W |
Rated output voltage | 70V/100V/200V |
Inputsensitivity | 0dBu |
S/N | ≥80dB |
Regulation ratio | ≤3dB |
Frequency response | 70Hz ~16kHz (±3dB) |
Tone | 100Hz (±10dB); 10kHz (±10dB) |
Power Consumption | 200W |
Powerrequirement | AC220~240V/50~60Hz |
Unit Size (mm) | (L×W×H)88´483´443 |
Netweight | 18 Kg |
As a pa system company, we will do our best to meet all the needs of customers.
No comments:
Post a Comment